CTEK MXS 5.0 UK

Automatic charging and maintenance for vehicle and motorcycle batteries, with reconditioning mode.

The MXS 5.0 is an advanced microprocessor controlled battery charger which gives unrivalled performance for lead acid batteries from 1.2-110Ah. It comes with automatic temperature compensation built in which ensures the best charging performance, even in the most extreme conditions. The MXS 5.0 also includes battery diagnosis to establish whether your battery can receive and retain a charge, patented automatic desulphation program, an AGM option which maximises the performance life of most Stop/Start batteries and a special Recond mode for reconditioning deeply discharged batteries. The MXS 5.0 uses CTEK’s patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods.

Features:

Charges batteries up to 110A
Easy to read LED display
Splash and dust proof (IP65)
Safe spark free operation
Reverse polarity protected
Short circuit proof

Battery capacity
1.2–160 Ah
Charging category
AC charging
Back Current Drain, details
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
Battery voltage
12 V
Input
220–240 VAC, 50–60 Hz, 0.6 A
Start voltage
2.0 V
Output
14.4/14.7/15.8 V, 5.0 A
Ripple**
Less than 4 %
Ripple, details
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
Back current drain*
Corresponding to less than 1 Ah/month
Battery types
12 V:; WET; MF; Ca/Ca; AGM; GEL
Battery chemistry
Lead acid
Ambient operating temperature
-20 ˚C to +50 ˚C
Ingress protection
IP65
Warranty
5 years
Warranty, info
Limited Warranty
Warranty, details
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.

CTEK MXS 3.8 UK

MThe MXS 3.8 is an advanced microprocessor controlled battery charger with floating cleaning by patented impulses for batteries from 1.2Ah to 85 AH. The MXS 3.8 solves a wide variety of problems of rechargeable batteries, this is the charger it is recommended for casual wear. MXS 3.8 Features include diagnosis of battery condition that determines if it can receive and retain a charge, a special mode and patented automatic désulfatation Snowflake programme for optimal charging on cold winter days. The patented pulse maintenance floating/by means that the MXS 3.8 is ideal for long-term maintenance. The entire process of battery testing, charging and maintenance is easily followed on the clear LED display.

The MXS 3.8 is a 12 V charger fully automatic “connect and forget about to 7 stages of charge which offers a selection of programs/0.8 A, A. Snowflake works on the 3.8 A. wide range of professional mode on all types of acide-plomb from 1.2Ah to 80 Ah batteries with a capacity for additional maintenance of 130 Ah. Protected from splashes and dust (IP65). The MXS 3.8 is easy to use and secure, it protects the electronics of the vehicle, does not have any spark, is protected against reverse polarity and short circuit protection.

Battery capacity
1.2–130 Ah
Charging category
AC charging
Back Current Drain, details
*) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
Battery voltage
12 V
Input
220–240 VAC, 50–60 Hz, 0.5 A
Start voltage
2.0 V
Output
14.4/14.7/15.8 V, 5.0 A
Ripple**
Less than 4 %
Ripple, details
**) The quality of the charging voltage and charging current is very important. A high current ripple heats up the battery which has an aging effect on the positive electrode. High voltage ripple could harm other equipment that is connected to the battery. CTEK battery chargers produce very clean voltage and current with low ripple.
Back current drain*
Corresponding to less than 1 Ah/month
Battery types
12 V:; WET; MF; Ca/Ca; AGM; GEL
Battery chemistry
Lead acid
Ambient operating temperature
-20 ˚C to +50 ˚C
Ingress protection
IP65
Warranty
5 years
Warranty, info
Limited Warranty
Warranty, details
CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.